Controller Manual

Programming Paddles (Scuf Function)

How to program your paddles:

1. Turn on your controller

2. Press any paddle button → LED blinks red once

3. Hold D-pad ↓ + X button for approx. 8 seconds → LED illuminates solid red

4. Now press:

   • The paddle button you want to assign

   • Then the button you want to assign (e.g., X, Circle, etc.)
     → LED blinks 2× = saved

5. Repeat step 4 for additional paddles

6. D-pad ↓ hold for 2 seconds → End programming

Reset or deactivate paddles:
Hold D-pad ← + Square for 5 seconds

---

 Adjusting LEDs

 Change color

1. D-pad ↑ + Square hold for 5 seconds → LED blinks

2. Select desired color with D-pad →

3. Again, hold D-pad ↑ + Square for 5 seconds → Color saved

 

Turn LED on/off

Hold simultaneously:

D-pad ↑ + D-pad → + Square
→ LEDs turn on/off

---

Calibrate Hall-Effect Sticks

👉 For calibration: dualshock-tools.github.io

Calibrate stick center

• Pull the stick into a corner

• Release abruptly

• Repeat for all corners

 Calibrate stick range

• Move the stick slowly in a circle

• Finally, click on "Save permanently"

 Done – your sticks are again centered & perfectly aligned

---

Support

Questions or problems?
Email us: modmasters.info@gmail.com
Or follow us on TikTok for tips & news @modmasters.official